AUTOMATIC TAPPING "FV1" LINE FOR CAR OIL FILTER LIDS
DESCRIPTION AND CHARACTERISTICS
Quality, productivity, reduced machine down-times, high flexibility. These are the bases of the new Record’s FV1 Automatic Tapping Machine Line.

The items to be machined are conveyed into the feed system hopper, which selects, aligns, and brings them to the operating position.

Two vertical chucks, both equipped with brushless motors, accomplish the working operation.

The combination of Power and Speed allows taking the greatest possible advantage of these new tapping tools.

The items, after being machined and cleaned, fall through a chute onto a drive roll or directly into a tank, while the chips and the liquid coolant are conveyed to the hold-up tank.

The working stroke and speeds, outward and return independent, are entered on an operator control panel; they can also be stored and recalled according to a specific item in process.

The display constantly shows the machine tool status and its diagnostics with written messages.

The tapping torque is controlled by a microprocessor system and, thanks also to an axial core pins safety device, the quality of the produced thread and the core pins wear are constantly under control.

A rapid change core replacing occurs in a very short time, as well as the working passage from one type of item to another, which also is fast and simple.

Customized solutions and applications are always examined to satisfy any market need.

TECHNICAL INFORMATION

Tapping Capacity   1" UNF
Hourly Production - 3/4 UNF pcs  1200 - 1300
Tapping Working Speed n/1' 5-1150
VTapping Return Speed n/1' 5-1150
Brushless motor torque, each. Nm 24
Maximum working torque mm 100
Mandrel hitch DIN 55050 mm 36
Feed hopper capacity It 700
PICTURE OF OPERATION

HOMEPAGE